34 jobs for “systems engineer”
Flarebright Bicester £39,000 – £49,000 pa
Contributes across the full development lifecycle, from concept and algorithm design to system integration, testing and troubleshooting of safety-critical navigation and autonomy software in C++. Works with a multidisciplinary team on real-time embedded systems, hardware/software-in-the-loop testing and flight test activities, producing design documentation and test reports.
National Crime Agency Gillingham £47,049 pa
Lead drone pilot for the NCA's Technical Operations unmanned vehicle programme, responsible for flight planning and clearances, piloting a range of UAS and USV platforms, and developing innovative technical surveillance capabilities. The role involves training the drone cadre, engaging with the Civil Aviation Authority and suppliers, and acting as subject matter expert on unmanned vehicles.
Callen Lenz Salisbury £40,000 – £50,000 pa
Design, develop, integrate and verify electronic hardware and systems for unmanned aerial vehicles, covering analogue, digital and mixed-signal circuitry, PCB/PCBA design, interfaces, sensors and test equipment across the full engineering lifecycle. Works alongside Systems, Software, Air Vehicle, Avionics, Test and Manufacturing teams, with emphasis on DfM, DfA, DfT and qualification for production.
Tekever Bristol
Design and develop avionics subsystems for uncrewed aircraft, including power generation and distribution, navigation and sensor interfaces. Produce schematics and simple board layouts in Altium, harness drawings and wiring lists, and support bench and environmental testing. Graduates gain early design ownership, splitting time between design, the lab and test activity.
QinetiQ Farnborough £47,250 – £52,500 pa
Designs, develops and delivers autonomy and control software for complex military aviation systems, covering algorithm development, modelling and simulation of uncrewed systems. Owns technical work packages and supports hardware integration, testing and formally assessed trials in the UK and overseas, working with C, ideally C++, and Matlab alongside multidisciplinary teams.
Tekever Bristol
Hands-on role integrating third-party and military-grade sensors into autonomous platforms, building adapters and drivers, and developing sensor/data fusion and geolocation pipelines that turn raw detections into reliable tracks. Ships production C++ and Rust with ROS2, tuning Kalman-filter-based tracking against real and synthetic data, and works daily with AI coding assistants.
Spectrum IT Recruitment Bampton £40,000 – £60,000 pa
Design and develop safety-critical embedded software for next-generation autonomous systems, working within a specialist team and contributing to software architecture. The role sits in an evolving, regulated engineering space and requires strong C/C++ embedded skills, real-time systems experience, and comfort with AI applied to robotics.
Windracers Fareham
Designs aircraft structures, mechanisms and mechanical subsystems for large fixed-wing UAVs used in logistics and defence missions. Works across the full lifecycle from concept and 3D CAD through prototyping, ground and flight testing to production, producing drawings, BOMs and manufacturing documentation with multidisciplinary teams.
Shield AI London
Customer-facing engineer deploying Shield AI's Hivemind autonomy software on-site with customers, supporting integration, training and debugging of API issues. Builds AI and autonomy applications using the enterprise SDK in modern C++, and feeds customer insights back to product engineering. Involves roughly 30% travel and pre-sales support such as demos and conferences.
ECM Selection Cambridge £55,000 – £70,000 pa
Hands-on optical engineering role designing systems with lasers, lenses and cameras, taking products from concept through verification and troubleshooting to production readiness. Works closely with electronics, software and AI colleagues in a multidisciplinary team, integrating optical components with electromechanical systems, ideally using machine learning for machine vision.
Windracers Fareham
Entry-level role analysing airframe structures, mechanisms and payloads under static and dynamic loads, using FEA, hand calculations, vibration, modal and fatigue analysis to assess strength, stiffness and fatigue life. Works with the Airframe Lead and a Senior Stress Engineer, collaborating with design and physical testing teams and producing stress reports and compliance documentation for airworthiness certification.
Leonardo Yeovil
Design or analyse helicopter transmission systems across conventional helicopters, tilt rotors and unmanned air systems, covering the full product lifecycle from concept to in-service support. Designers produce 3D models and 2D drawings in CATIA V5 for gears, bearings, casings, shafts and couplings; analysts perform stress, fatigue and finite element analysis. The role spans UK and Italian sites with international travel.
Empresaria Group plc Bristol £50,000 – £80,000 pa
Develops onboard software for uncrewed aerial systems, spanning autopilots, autonomy, payloads and mission-critical subsystems. Works on existing aircraft and clean-sheet designs, taking code from concept and SIL/HIL simulation through to real-world flight testing, with C++ and/or Rust in embedded and real-time environments.
Matchtech Cambridgeshire £350 – £450 pd
Contract CAD engineering role in the aerospace sector, creating accurate 3D geometry from existing designs and CAD data to support specialist UAS sub-module components and assemblies. Day to day involves smooth surface and skeleton modelling in Creo, WINDCHILL data management, the AAX plugin, and liaising with manufacturing facilities for fast-turnaround production of parts such as aerodynamic enclosures and radomes.
Platform Recruitment Cambridge £45,000 – £65,000 pa
Design and develop embedded firmware for advanced radar and sensing systems used in UAV applications. Work across the full product lifecycle in a collaborative, engineering-led environment using C/C++ on STM32 microcontrollers in bare-metal and RTOS environments. Engage in system-level debugging and contribute to software architecture for next-generation sensing technologies.
Saab Farnborough
A two-year graduate programme rotating through four six-month placements in Saab UK's Sensor Systems Radar business, working hands-on with 3D radar technology at the Farnborough office. Graduates rotate as a cohort, build experience across core engineering disciplines, and may convert to a permanent role based on performance and business needs.
