Drone Jobs in Bristol

15 jobs

Results

Eagle Eye Innovations Ltd logo

Eagle Eye Innovations Ltd · 51–200 people

Continuing Air Worthiness Manager

  • Lincoln
  • On-site
  • Senior
  • Permanent

Owns continuing airworthiness management for a fleet of remotely piloted aircraft systems, building and maintaining maintenance programmes and keeping technical records current. Acts as the link between Engineering, Flight Operations and Quality and Compliance, leading airworthiness audits, defect investigations and regulator contact while bringing new RPAS types into service.

RPAS

Featured Last week

Copello

Software Engineer- C

  • Bristol
  • £70,000 – £90,000 pa
  • Mid-level
  • Permanent

Develop, integrate and debug embedded software for UAV platforms, including autopilots, autonomy systems and payloads, using C++ and/or Rust on Linux. The role spans software architecture, automated testing and verification, and support for system integration and flight trials alongside international multidisciplinary teams.

Claude

Last week

Callen Lenz

Senior Flight Control Engineer

  • Bristol
  • On-site
  • £60,000 – £70,000 pa
  • Senior · manages people
  • Permanent

Lead software project teams developing flight control and autopilot simulation software, using model-based design in MATLAB and Simulink. Responsibilities span flight dynamics modelling, flight performance studies, requirements definition, code and model review, and testing, while coaching team members and supporting project scoping and estimation.

MATLAB · Simulink

BPSS clearance Last month

Leonardo

FPGA Design Engineers

  • Luton
  • Hybrid
  • Lead · manages people
  • Permanent

Design and deliver complex FPGA/Firmware for self-protection systems on fast jet, UAV, land and naval platforms, covering requirements capture, VHDL/Verilog design, test and integration with PCB designers. Lead and Principal engineers also support and guide several engineers, enhance processes across UK-wide firmware teams, and may travel for technical reviews. Work uses Xilinx, Intel and Microsemi architectures, high-speed interfaces and DO-254-style structured design.

Xilinx · Intel (Altera) · Microsemi (Actel) +6

DV clearance 2 months ago

Leonardo

Principal Microwave Engineer

  • Luton
  • Hybrid
  • Lead
  • Permanent

Design and develop microwave and RF circuits operating to and beyond 20 GHz for electronic warfare self-protection systems, covering concept, requirements, detailed design, integration and test. Use EM and circuit simulation tools, hands-on RF test equipment and debug, while providing technical leadership and mentoring within an integrated project team.

Keysight ADS · Microwave Office · CST Microwave Studio +5

DV clearance Last month

Tekever

Liaison Officer

  • Bristol
  • Hybrid · 3 days in office
  • Mid-level

Acts as the on-site company representative coordinating UAS flight operations with customers and external agencies such as Border Force and Coast Guard. Tasks flight crews, runs daily and weekly briefings, books airspace, disseminates flight plans, and handles mission evidence and imagery feeds into the Joint Control Room.

Tekever Systems

2 weeks ago

Get new bristol roles by email. One email a week when new roles match, or daily if you prefer. Stop any time.

Empresaria Group plc

Embedded Software Engineer

  • Bristol
  • Hybrid · 3 days in office
  • £50,000 – £80,000 pa
  • Mid-level
  • Permanent

Develops onboard software for uncrewed aerial systems, spanning autopilots, autonomy, payloads and mission-critical subsystems. Works on existing aircraft and clean-sheet designs, taking code from concept and SIL/HIL simulation through to real-world flight testing, with C++ and/or Rust in embedded and real-time environments.

PX4 · ArduPilot · MAVLink +6

SC clearance 2 weeks ago

Tekever

Principal / Senior Systems Engineer

  • Bristol
  • Hybrid · 3 days in office
  • Lead

Take technical ownership of systems engineering across UAV/UAS and defence programmes, from mission analysis and ConOps through requirements, architecture, integration, verification and operational delivery. Lead multidisciplinary work spanning aircraft, avionics, autonomy, payloads and ground systems, acting as a technical bridge between teams. Requires UK SC eligibility and occasional international travel.

HIL

SC clearance Yesterday

Tekever

Design Airworthiness Engineer

  • Bristol
  • Hybrid · 3 days in office
  • Mid-level

Joins a growing UK airworthiness team, initially focused on regulatory approval of a tactical uncrewed aircraft system for international customers and UK defence. Builds certification evidence, compliance matrices and SORA-based safety cases with design, systems and test engineers, later widening to other products and design organisation approval.

EASA Part 21 · UK CAA · MAA DAOS +1

SC clearance Last week

Tekever

Propulsion Manager

  • Swindon
  • Hybrid · 3 days in office
  • Mid-level · manages people

Build and run a propulsion manufacturing capability from scratch at the Swindon site, covering facility layout, equipment commissioning, fuel and engine test cells, and in-house 3D printing. Recruit and lead the shop-floor team, manage supply chain outsourcing, and drive production rate, quality and continuous improvement across a European plant network.

ERP · MES

SC clearance 3 weeks ago

Tekever

Technical Documents Manager

  • Bristol
  • Hybrid · 3 days in office
  • Mid-level · manages people

Lead the development and lifecycle management of S1000D-compliant technical publications for Unmanned Air System programmes within an Integrated Logistics Support capability. Own the CSDB, data module structures and DMRL, liaise with customers and regulators on airworthiness requirements, and manage a technical authoring team through engineering change and configuration control.

CSDB · S1000D · IETP

SC clearance Last month

Tekever

Additive Manufacturing Technician

  • Swindon
  • Hybrid · 3 days in office

Hands-on role operating and maintaining industrial additive manufacturing equipment, including SLS and polymer systems, taking builds from preparation through post-processing and inspection. Works closely with Manufacturing, Design Engineering and Quality to develop processes, support DfAM activities and production components for aerospace and defence systems.

SLS · PA12 · EOS +3

2 months ago

Tekever

Electronics Technician

  • Swindon
  • Hybrid · 3 days in office

Manufacture and test PCBs, wiring harnesses and electro-mechanical sub-assemblies, including box-build integration, firmware loading and fault diagnosis. Uses multimeters, power supplies and oscilloscopes to verify product quality, and maintains work instructions and SOPs within a multidisciplinary production team.

Multimeters · Oscilloscopes · Power Supplies

2 months ago

Tekever

Principal FPGA Engineer

  • Bristol
  • Hybrid · 3 days in office
  • Lead

Technical owner of FPGA and programmable logic design inside gimbal payloads, covering the video capture and processing chain, sensor and high-speed serial interfaces, and real-time pointing and stabilisation control. The role takes in-house payload electronics from prototype to qualified production, with short design cycles and direct ownership of logic that flies.

Altium

SC clearance 2 months ago

Tekever

UAS Remote Pilot

  • Bristol
  • Remote

Operates uncrewed aerial systems on defence and maritime surveillance missions, supporting the RPIC with flight planning, pre-flight inspections, real-time hazard mitigation and post-flight debriefings. Also trains and mentors UAS operators, maintains regulatory records and provides feedback to improve TEKEVER platforms. Requires frequent travel to customer sites in the UK, Portugal, US and Europe, with at least three days a week in South West England when not deployed.

H900 · H450 · WK +5

SC clearance 3 months ago

Tekever

Composites Manager

  • Swindon
  • Hybrid · 3 days in office
  • Mid-level · manages people

Build and run a composites manufacturing capability from scratch for drone airframe structures, covering facility layout, equipment commissioning, pre-preg lay-up, tooling, cure, trim and inspection. Recruit and lead the shop-floor team, own quality, safety and production rate, and transfer best practice across European plants.

Autoclave · ERP · MES +3

SC clearance Last month

Filters

Work policy

Job type

Seniority

Are you sure?